D1000 Series Galvanic Isolators

G.M. International DIN RAIL mount Intrinsic Safety Galvanic Isolators provide the most simple and cost effective means of implementing Intrinsic Safety into your Hazardous Area applications.

High Packing Density

• High channel density result from innovative circuit design using advanced surface mount components.
• Ultra slim 4 channels 22,5 mm wide DIN rail mounting modules.
• 6 mm per channel.
• 176 I/O channels per metre of DIN rail.
• Single, dual or quad channel models

High performance

• High Signal transfer accuracy and repeatability.
• Advanced circuitry provides low heat dissipation, ensuring modules run cool despite their high functionality
• Low power consumption.
• SMD manufacturing to maximise long, reliable life.

Wide Functionality

• Wide Range of digital switch and analog I/O.
• Relay contacts rated for 2 amp. to directly switch high loads.
• Three port galvanic isolation to eliminate noise, ground loop problems and to provide Intrinsic Safety without a high integrity safety earth connection.
• Line Fault alarm detects open or short circuit of field cables

• Single channel versions available if required, to provide single loop integrity on Emergency Shut Down and Fire & Gas applications
• Configure using DIP switch for easy field set up.
• LED indication for power, signal status and line fault conditions
• 35 mm (Top Hat) DIN Rail
• Plug-in screw terminal blocks to secure termination up to 2,5 square mm
• Accept DC power supply over a wide (20-30 V) range.
• Wide operating temperature range

• Analog Input
• Analog Output
• Digital Input
• Digital Output
• Multiplexer
• Signal Converter and Trip Amplifier
• Serial Line Converter
• Load Cell Isolator Converter
• Temperature Converter
• Flammable Liquid Presence Detector - Interface
• Power Supply
• Configurator
• PC Adapter
• Elcon 1000 series adapter
• Accessory
• Field Indicator
• Signal Converter
• Vibration Transducer
• Relay Output

• Intrinsic Safety Certification to CENELEC according 94/9/EC (ATEX).
• Meets European Directives for EMC. All modules carry CE mark
• Certificates page for complete listing

D1000 Models:

• BUS - Power Bus Optional Enclosure
• CABF010 - SUB-D 9 Poles NULL Modem Serial Cable (F/F)
• D1010D - 2 Ch, 0/4-20 mA TX Repeater Power Supply or Signal Duplicator, SIL 3
• D1010D-046 - Repeater Power Supply Smart Compatible DIN Rail
• D1010S - 1 Ch, 0/4-20 mA TX Repeater Power Supply, SIL 3
• D1010S-046 - Repeater Power Supply Smart Compatible DIN Rail, SIL 3
• D1010S-054 - mV / mA Signal Converter. Low response time. SIL 2
• D1010S-056 - mV / mA Signal Converter. Low response time. SIL 2
• D1010S-057 - mV / mA Signal Converter. Low response time. SIL 2
• D1012Q - 4 Ch, Quadruple Repeater Power Supply
• D1014D - 2 Ch, High integrity 4-20 mA TX Repeater Power Supply, SIL 3
• D1014S - 1 Ch, high integrity 4-20 mA TX Rep. Power Supply, SIL 3
• D1020D - 2 Ch, 0/4-20 mA I/P Isolating Driver, SIL 2
• D1020S - 1 Ch, 0/4-20 mA I/P Isolating Driver, SIL 2
• D1021S - 1 Ch, Powered Isolating Driver, Fault detection Smart, SIL 2
• D1022D - 2 ch. Loop Powered Fire / Smoke Detector Interface
• D1022S - 1 ch. Loop Powered Fire / Smoke Detector Interface
• D1030D - 2 Ch, DC Power Switch/Proximity Detector Repeater, Relay Out.
• D1030S - 1 Ch, DC Power Switch/Proximity Detector Rep.; Relay Out.
• D1031D - 2 Ch, Switch/Proximity Detector Repeater. Transistor Out.
• D1031Q - 4 Ch, Switch/Proximity Detector Repeater. Transistor Out.
• D1032D - 2 Ch, Switch/Proximity Detector Repeater. Relay Out, SIL 2
• D1032Q - 4 Ch, Switch/Proximity Detector Repeater. Relay Out, SIL 2
• D1033D - 2 Ch, Switch/Proximity Detector Repeater, Transistor Out, SIL 2
• D1033Q - 4 Ch, /Proximity Detector Repeater, Transistor Out, SIL 2
• D1034D - 2 Ch, Transparent Digital Repeater For Safety PLC, SIL 3
• D1034S - 1 Ch, Transparent Digital Repeater for Safety PLC, SIL 3
• D1035S - Frequency-Pulse Isolating Repeater DIN-Rail Model D1035S
• D1040Q - Single to Quad Channel Digital Output Isolating Driver, SIL 3
• D1041Q - Quad Channel LEDs Isolating Driver.
• D1042Q - Single to Quad Channel Digital Output Isolating Driver, SIL 3
• D1043Q - Single to Quad Channel Digital Output Isolating Driver, SIL 3
• D1044D - 2 Ch, Digital Relay Output Module
• D1044S - 1 Ch, Digital Relay Output Module
• D1045Y - 2 Ch, Digital Output Loop / Bus Powered
• D1046Y - 2 Ch, Digital Output Loop / Bus Powered
• D1047S - 1 Ch, Digital Output Driver Loop Powered for ND Loads, SIL 2
• D1048S - 1 Ch, Digital Output Driver Loop Powered for NE Loads, SIL 3
• D1049S - 1 Ch, Digital Output Driver Bus Powered for NE Loads, SIL 3
• D1052D - 2 Ch, mA-V Input, mA-V Output, SW Programmable
• D1052S - 1 Ch, mA-V Input, mA-V Output, SW Programmable
• D1052X - 1 Ch, Analog Signal Converter Duplicator
• D1052Y - 2 Ch, Analog Signal Converter Selector / Adder / Subtractor
• D1053S - 1 Ch, Analog Signal Converter and Trip Amplifier
• D1054S - 1 Ch, 0/4-20 mA TX Repeater, Power Supply, and Trip Amplifier
• D1060S - 1 Ch, Frequency-Pulse Converter, Repeater and Trip Amplifier
• D1061S - Single Channel RS 422 / RS 485 Field Bus Isolating Repeater
• D1062S - 1 Ch, Vibration Transducer Interface, SIL 2
• D1063S - 1 Ch, Load Cell / Strain Gauge Bridge Isolating Repeater
• D1064S - 1 Ch, Load Cell / Strain Gauge Bridge Isolating Converter
• D1072D - 2 Ch, Temperature Signal Converter, Duplicator, Selector, Adder, Subtracter, SIL 2
• D1072S - 1 Ch, Universal Temperature Signal Converter, SIL 2
• D1073S - 1 Ch, Universal Temp. Converter and Trip Amplifier
• D1080D - Flammable Liquid Presence Detector Interface Relay Output
• D1081D - Flammable Liquid Presence Detector Interface Transistor Output
• D1092D - 2 Ch, Relay Output Module for NE and ND loads, SIL 3
• D1092D-069 - 2 Ch, NE Relay Output Module, SIL 3
• D1092S - 1 Ch, Relay Output Module for NE and ND Loads, SIL 3
• D1092S-069 - 1 Ch, NE Relay Output Module, SIL 3
• D1093S - 1 Ch, Relay Output Module for NE and ND loads with diagnostics, SIL 3
• D1098S - SIL3 Digital Output Driver Loop Powered for NE Loads
• D1099S - SIL3 Digital Output Driver Loop Powered for ND Loads
• D1130D - 2 Ch, AC Powered Switch/Proximity Detector Repeater. Relay Out.
• D1130S - 1 Ch, AC Power Switch/Proximity Detector Repeater, Relay Out.
• D1180D - Flammable Liquid Presence Detector Interface Relay Output
• MCHP064 - Tag Plate in polycarbonate material
• MCHP065 - Din Rail Anchor, for Terminal Block Side of Bus Power
• MCHP090 - A4 Labels for D1000 Tag Housing
• MCHP139 - 5 mm Din Rail Spacer for D1000 Series Modules
• MOR015 - Plug-in Terminal Block Female, Vertical output, for Power Bus
• MOR016 - DIN Rail End Stopper Terminal Block
• MOR017 - Plug-in Terminal Block Female, Horizontal Output, for Bus Power
• MOR022 - Plug-in Terminal Block Male, Horizontal Output, for Bus Power
• OPZ91 - Cold Junction Compensator Required for TC Inputs
• PPC1090 - Pocket Portable Configurator for D105* D106* D107*
• PPC1092 - D1000 Series Serial Adapter Configurator.
• PSD1000 - Universal AC input 24V-500mA Switching Power Supply.
• PSD1001 - Quad Channel 15V-20mA Intrinsically Safe Power Supply, SIL 3
• PSD1001C - Single Channel 10V-150mA Intrinsically Safe Power Supply, SIL 3
• PSD1004 - Din Rail Mount 5V-160mA Intrinsically Safe Power Supply.
• PSU1003 - PCB Mount 5V-160mA Intrinsically Safe Power Supply.